A computational study to determine the role of σ-hole in Br/OH substituted nido-carborane and its binding capabilities.

A detailed investigation of the σ-hole on the halogen atom present in the nido-heteroboranes is made by employing quantum mechanical methods. The bromide and the hydroxyl groups are incorporated in the exo-substituents of the nido-boranes. The potential of the bromide σ-hole was compared to that of electrostatic potential of hydroxyl group counterpart. The presence of a carbon atom vertex, in a different position of a system, influences the σ-hole and hence its binding abilities. Bromide substituted nido-carboranes have less potential and hence weaker binding ability compared to their closo-counterparts. Binding affinity with aliphatic is found to be more compared to that of aromatic system. The presence of solvent dampened the electrostatic interactions. Apart from the neutral system, the binding capabilities of charged nido-heteroboranes were also studied. The results of this study will be further useful for several applications viz., crystal engineering, drug designing (Pharmaceuticals), medicine, material science, energy storage devices, etc.

Plight of CORMs: The unreliability of four commercially available CO-releasing molecules, CORM-2, CORM-3, CORM-A1, and CORM-401, in studying CO biology.

Carbon monoxide (CO) is an endogenously produced gaseous signaling molecule with demonstrated pharmacological effects. In studying CO biology, three delivery forms have been used: CO gas, CO in solution, and CO donors of various types. Among the CO donors, four carbonyl complexes with either a transition metal ion or borane (BH3) (termed CO-releasing molecules or CORMs) have played the most prominent roles appearing in over 650 publications. These are CORM-2, CORM-3, CORM-A1, and CORM-401. Intriguingly, there have been unique biology findings that were only observed with these CORMs, but not CO gas; yet these properties were often attributed to CO, raising puzzling questions as to why CO source would make such a fundamental difference in terms of CO biology. Recent years have seen a large number of reports of chemical reactivity (e.g., catalase-like activity, reaction with thiol, and reduction of NAD(P)+) and demonstrated CO-independent biological activity for these four CORMs. Further, CORM-A1 releases CO in an idiosyncratic fashion; CO release from CORM-401 is strongly influenced or even dependent on reaction with an oxidant and/or a nucleophile; CORM-2 mostly releases CO2, not CO, after a water-gas shift reaction except in the presence of a strong nucleophile; and CORM-3 does not release CO except in the presence of a strong nucleophile. All these beg the question as to what constitutes an appropriate CO donor for studying CO biology. This review critically summarizes literature findings related to these aspects, with the aim of helping result interpretation when using these CORMs and development of essential criteria for an appropriate donor for studying CO biology.

Synthesis of Novel Carborane-Containing Derivatives of RGD Peptide.

Short peptides containing the Arg-Gly-Asp (RGD) fragment can selectively bind to integrins on the surface of tumor cells and are attractive transport molecules for the targeted delivery of therapeutic and diagnostic agents to tumors (for example, glioblastoma). We have demonstrated the possibility of obtaining the N- and C-protected RGD peptide containing 3-amino-closo-carborane and a glutaric acid residue as a linker fragment. The resulting carboranyl derivatives of the protected RGD peptide are of interest as starting compounds in the synthesis of unprotected or selectively protected peptides, as well as building blocks for preparation of boron-containing derivatives of the RGD peptide of a more complex structure.

Acridine/Acridone-Carborane Conjugates as Strong DNA-Binding Agents with Anticancer Potential.

Synthesis of acridine derivatives that act as DNA-targeting anticancer agents is an evolving field and has resulted in the introduction of several drugs into clinical trials. Carboranes can be of importance in designing biologically active compounds due to their specific properties. Therefore, a series of novel acridine analogs modified with carborane clusters were synthesized. The DNA-binding ability of these analogs was evaluated on calf thymus DNA (ct-DNA). Results of these analyses showed that 9-[(1,7-dicarba-closo-dodecaborane-1-yl)propylamino]acridine (30) interacted strongly with ct-DNA, indicating its ability to intercalate into DNA, whereas 9-[(1,7-dicarba-closo-dodecaborane-1-yl)propanamido]acridine (29) changed the B-form of ct-DNA to the Z form. Compound 30 demonstrated cytotoxicity, was able to inhibit cell proliferation, arrest the cell cycle in the S phase in the HeLa cancer cell line, and induced the production of reactive oxygen species (ROS). In addition, it was specifically localized in lysosomes and was a weak inhibitor of Topo IIα.

Phosphido-borane-supported stannates.

The reactions between SnCl2 and three equivalents of the alkali metal phosphido-borane complexes [R2P(BH3)]M yield the corresponding tris(phosphido-borane)stannate complexes [LnM{R2P(BH3)}3Sn] [R2 = iPr2, LnM = (THF)3Li (2Li), (Et2O)Na (2Na), (Et2O)K (2K); R2 = Ph2, LnM = (THF)Li (3Li), (THF)(Et2O)Na (3Na), (THF)(Et2O)K (3K); R2 = iPrPh, LnM = (THF)4Li (4Li)]. In each case X-ray crystallography reveals an anion consisting of a trigonal pyramidal tin centre coordinated by the P atoms of the phosphido-borane ligands. These tris(phosphido-borane)stannate anions coordinate to the alkali metal cations via their BH3 hydrogen atoms in a variety of modes to give monomers, dimers, and polymers, depending on the alkali metal and the substituents at the phosphorus centres. In contrast, reactions between SnCl2 and three equivalents of [tBu2P(BH3)]M (M = Li, Na) gave the known hydride [M{tBu2P(BH3)}2SnH], according to multinuclear NMR spectroscopy.

The assignment of 11 B and 1 H resonances in the post-reaction mixture from the dry synthesis of Li(BH3 NH2 BH2 NH2 BH3 ).

We report a detailed 1 H NMR and 11 B NMR study of as synthesised Li ( BH 3 NH 2 BH 2 NH 2 BH 3 ) obtained in a novel dry-synthesis method. A combination of 1D and 2D single- and triple-quantum techniques was used for the assignment of all observed signals. Minor side-products and reactants were detected in the product: NH 3 BH 3 , Li ( NH 2 BH 3 ) , Li ( BH 4 ) , and two yet unknown salts containing 7-membered chain anions: ( BH 3 NH 2 BH 2 NH 2 BH 2 NH 2 BH 3 ) - and ( BH ( NH 2 BH 3 ) 3 ) - . We believe the assignment provided within this study might be helpful when analysing the mixtures containing numerous ammonia borane derivatives, which often give overlapping signals that are hard to distinguish.

Boosting Ring Strain and Lewis Acidity of Borirane: Synthesis, Reactivity and Density Functional Theory Studies of an Uncoordinated Arylborirane Fused to o-Carborane.

Among the parent borirane, benzoborirene and ortho-dicarbadodecaborane-fused borirane, the latter possesses the highest ring strain and the highest Lewis acidity according to our density functional theory (DFT) studies. The synthesis of this class of compounds is thus considerably challenging. The existing examples require either a strong π-donating group or an extra ligand for B-coordination, which nevertheless suppresses or completely turns off the Lewis acidity. The title compound, which possesses both features, not only allows the 1,2-insertion of P=O, C=O or C≡N to proceed under milder conditions, but also enables the heretofore unknown dearomative 1,4-insertion of Ar-(C=O)- into a B-C bond. The fusion of strained molecular systems to an o-carborane cage shows great promise for boosting both the ring strain and acidity.

Study of the first step of hydrogen release in ammonia borane using high-resolution Raman spectroscopy and different heating ramps.

Ammonia borane, as a source of hydrogen, has attracted much attention due to its high hydrogen content, low molecular weight, and high stability in solution. However, the process and enhancement of hydrogen release must be done practically under ambient conditions. For this work, Raman spectroscopy, principal component analysis (PCA), and molecular simulation were applied to study the hydrogen release process of ammonia borane. Three stages of release were observed from room temperature to 1300 °C. The shift, the appearance, and the disappearance of the Raman bands were evident in the whole process. In-situ monitoring of Raman and PCA, with four different heating rates between 70 and 130 °C, was done; ammonia borane showed visible variations in its first release step, in which a fast rate helped reduce distortion in the release process. Finally, molecular simulation of ammonia borane using the Density Functional Theory (DFT) in calculations showed that dihedral rotation and stretching of the hydrogen bonds can occur before the first release step.

Boron-Cluster Embedded Necklace-Shaped Nanohoops.

The combination of carbon-based nanohoops with other functional organic molecular structures should lead to the design of new molecular configurations with interesting properties. Here, necklace-like nanohoops embedded with carborane were synthesized for the first time. The unique deboronization of o-carborane has led to the facile preparation of ionic nanohoop compounds. Nanohoops functionalized by nido-o-carborane show excellent fluorescence emission, with a solution quantum yield of up to 90.0 % in THF and a solid-state quantum efficiency of 87.3 %, which opens an avenue for the applications of the nanohoops in OLEDs and bioimaging.

Carbon supported Pd based catalysts for the hydrolytic dehydrogeneration of morpholine borane.

Although the reducing property of morpholine borane is frequently used, there are few studies on its use as a chemical hydrogen storage material. This study presents the catalyst efficiency for hydrogen production in the dehydrogenation reaction of morpholine borane as efficient and cost-effective hydrogen storage material, which can be used as an alternative to depleting fossil fuels. It was studied with four different catalysts as activated Carbon-supported Pd, PdAg, PdNi, and PdCo. Bimetallic palladium based catalysts were used for the dehydrogenation of morpholine borane for the first time. Nanoparticles were synthesized using the chemical reduction method. The catalytic effects of different metal ratios of PdNi/C nanoparticles, which were concluded to have the best catalyst effect, were investigated and it was observed that the ratio of Pd50Ni50/C nanoparticles exhibited better catalytic behavior, and optimization studies were carried out with Pd50Ni50/C nanoparticles. Transmission Electron Microscopy, X-Ray Diffraction, and X-Ray Photoelectron Spectroscopy analyzes were performed for the characterization of nanoparticles. According to the characterization analyzes of Pd50Ni50/C nanoparticles, the mean particle size was determined as 2.0 ± 1.0 nm. Catalyst efficiency was determined by performing the substrate, catalyst, and temperature experiments separately in the dehydrogenation reaction of Morpholine Borane. These parameters are respectively; Ea and ΔH were calculated as 93.2 kJ/mol, and 90.6 kJ/mol. The reusability experiments were carried out in 4 cycles. In other words, with this study, it was concluded that the reusability of Pd50Ni50/C nanoparticles synthesized by the chemical method is high and their catalytic activity is excellent.

Iron(0) tricarbonyl η4-1-azadiene complexes and their catalytic performance in the hydroboration of ketones, aldehydes and aldimines via a non-iron hydride pathway.

Six iron(0) tricarbonyl complexes (1a-f) with a η4-1-azadiene moiety were prepared and their performance in the hydroboration of unsaturated organic compounds was investigated. All the complexes exhibit catalytic activity towards hydroboration of ketones, aldehydes and aldimines with pinacolborane (HBpin) as a hydride source to lead to secondary alcohols, primary alcohols, and secondary amines, respectively, after hydrolysis of the hydroboration products. Of the iron(0) tricarbonyl complexes, complex 1e is the most robust one and was employed throughout the catalytic investigation. Its preference towards the three types of substrates is as follows: aldimines > aldehydes ≫ ketones. In total, 24 substrates were examined for the catalytic hydroboration reactivity and generally, isolation yields ranging from 40% to 95% were achieved. Mechanistic investigation suggests that the catalytic hydroboration of the substrates proceeds via intramolecular hydride transfer without going through an Fe-H intermediate. As indicated by 1H NMR spectroscopic monitoring, the substrates and the borane agent bind to the iron centre and the imine N atom, respectively, which facilitates the hydride transfer by activating the B-H bond and polarizing the double bond of the substrates.

Direct Phenylation of nido-B10H14.

As a preliminary step toward its condensation into the porous polymer Activated Borane, the thermolysis of nido-B10H14 (1) in benzene at 200 °C results in the generation of a number of phenylated borane molecular species. The principal product is the new monophenylated compound 5-Ph-nido-B10H13 (2), isolated in 48% yield (based on consumption of 1) and structurally characterized by single-crystal X-ray diffraction analysis, NMR, and mass spectrometry along with other minor products, such as 6-Ph-nido-B10H13 (3), for which we observe UV-light-driven conversion into 2 via a "vertex-flip" mechanism, and novel diphenylated 5,8-Ph2-nido-B10H12 (4). Together, the phenylated derivatives provide a valuable insight into the assembly of Activated Borane and ultimately inform on its structure. The new compounds also display strong blue fluorescence in both solid-state and in solution and are the first examples of the direct phenylation of nido-B10H14, thus opening the door to the straight-forward synthesis of highly luminescent organic-borane hybrid systems.

Palladium-Mediated Incorporation of Carboranes into Small Molecules, Peptides, and Proteins.

Carboranes represent a class of compounds with increasing therapeutic potential. However, few general approaches to readily embed carboranes into small molecules, peptides, and proteins are available. We report a strategy based on palladium-mediated C-X (X = C, S, and N) bond formation for the installation of carborane-containing moieties onto small molecules and peptides. We demonstrate the ability of Pd-based reagents with appropriate ligands to overcome the high hydrophobicity of the carborane group and enable chemoselective conjugation of cysteine residues at room temperature in aqueous buffer. Accordingly, carboranes can be efficiently installed on proteins by employing a combination of a bis-sulfonated biarylphosphine-ligated Pd reagent in an aqueous histidine buffer. This method is successfully employed on nanobodies, a fully synthetic affibody, and the antibody therapeutics trastuzumab and cetuximab. The conjugates of the affibody ZHER2 and the trastuzumab antibody retained binding to their target antigens. Conjugated proteins maintain their activity in cell-based functional assays in HER2-positive BT-474 cell lines. This approach enables the rapid incorporation of carborane moieties into small molecules, peptides, and proteins for further exploration in boron neutron capture therapy, which requires the targeted delivery of boron-dense groups.

A neutral analogue of a phosphamethine cyanine.

Reaction of an imidazolio-phosphide with an N-heterocyclic bromo-borane and NaH afforded a neutral analogue of a phosphamethine cyanine cation. DFT studies were used to analyse the dative bonding across P-C/B bonds and the conformational preferences and imply that the observed conformation is imposed by sterics.

The stereoselective conversion of epimerized alkoxyl phosphine-borane to P,C, axial-stereogenic tertiary phosphine via cleavage of P-O bond.

The P-O bond of epimerized alkoxyl phosphine-borane was cleaved by naphthalene-lithium, to form two diastereomers of P-anions in a ratio of 86 : 14, which was then converted to secondary phosphine-borane via acidification, and to tertiary phosphines with alkyl halides with enhanced 96 : 4 dr. The isolated tertiary phosphine containing hydroxyl (in >99 : 1 dr) was converted to multi-stereogenic tertiary phosphines via O-alkylation with alkylene dihalides.

Synthesis and Characterization of Far-Red Emissive Boron-Based Triads Showing Large Stokes Shifts: Optical, TRANES, and Electrochemical Studies.

Herein, we report the design and synthesis of far-red emissive boryl-thiophene-BODIPY triads 1-3. The π-conjugation length and electronic communication between borane and BODIPY moieties are tuned by judiciously varying the size of the oligothiophene spacer in these triads (1, terthiophene; 2, quarterthiophene; and 3, pentathiophene). Conjugates 1-3 showed intriguing triple emissions in the blue to far-red regions. Detailed optical, time-resolved decay kinetics, time-resolved area-normalized emission spectra (TRANES), fluoride binding, and computational studies suggest that the multiple emissions in these triads are due to an inefficient transfer of energy from the boryl-oligothiophene to the BODIPY unit. In addition, all of the conjugates showed a ratiometric fluorescence response to fluoride ions.

Reductive depolymerization of polyesters and polycarbonates with hydroboranes by using a lanthanum(III) tris(amide) catalyst.

The homogeneous reductive depolymerization of polyesters and polycarbonates with hydroboranes is achieved with the use of an f-metal complex catalyst. These polymeric materials are transformed into their value-added alcohol equivalents. Catalysis proceeds readily, under mild conditions, with La[N(SiMe3)2]3 (1 mol%) and pinacolborane (HBpin) and shows high selectivity towards alcohols and diols, after hydrolysis.

Structurally rigidified cobalt bis(dicarbollide) derivatives, a chiral platform for labelling of biomolecules and new materials.

We report the difunctional modification of an anionic cobalta bis(dicarbollide)(1-) cluster with a B(8,8')-oxygen bridging unit that provides structural rigidity and an organic alkylazide substituent(s) on the carbon atoms of the metallacarborane cage. These ions present a good binding motif for incorporation into organic molecules using Huisgen-Sharpless (2+3) cycloaddition reactions. In addition, the compounds are chiral, as verified by separation of enantiomers using HPLC on chiral stationary phases (CSPs) and provide a high electrochemical peak in the window located outside of typical signals of biomolecules.

Electrochemical Cage Activation of Carboranes.

Carboranes are boron-carbon molecular clusters that possess unique properties, such as their icosahedron geometry, high boron content, and delocalized three-dimensional aromaticity. These features render carboranes valuable building blocks for applications in supramolecular design, nanomaterials, optoelectronics, organometallic coordination chemistry, and as boron neutron capture therapy (BNCT) agents. Despite tremendous progress in this field, stoichiometric chemical redox reagents are largely required for the oxidative activation of carborane cages. In this context, electrosyntheses represent an alternative strategy for more sustainable molecular syntheses. It is only in recent few years that considerable progress has been made in electrochemical cage functionalization of carboranes, which are summarized in this Minireview. We anticipate that electrocatalysis will serve as an increasingly powerful stimulus within the current renaissance of carborane electrochemistry.

Chiral FLP-catalyzed asymmetric hydrogenation of 3-fluorinated chromones.

The asymmetric hydrogenation of fluorinated olefins is an efficient pathway towards the synthesis of chiral fluorine-containing compounds. This paper described metal-free asymmetric hydrogenation of 3-fluorinated chromones with the use of readily available achiral borane and chiral oxazoline as an FLP catalyst for the first time. A variety of optically active 3-fluorochroman-4-ones were obtained in high yields with up to 88% ee.